2019-06-19
The scraper cleaning machine is a kind of chicken raising equipment suitable for chicken farms. It can automatically clean the poultry house manure. It is an automatic cleaning machine in modern breeding. It can effectively solve the high-density and cleansing of the poultry house. Incomplete problems and other problems, effectively saving labor and improving the environmental conditions of livestock and poultry houses. Scraper type septic machine is mostly used for step cage and online raising.
The commonly used scraper type septic machine is divided into full stroke type and step type. It consists of a traction machine (motor, reducer, sheave), wire rope, corner pulley, scraping board and electric control device.
Scraper-type septic machine is generally used for double-row chicken cages. When one is scraping the shovel, the other is in the return stroke. The chicken manure is scraped to the end of the chicken contract, and then sent out by the transverse spiral type septic machine. .
The full-stroke scraper cleaning machine is suitable for short ditch. The stepper scraper is suitable for long chicken houses and works in exactly the same way as the full stroke. The scraper type septic machine uses the friction and the pulling force to make the squeegee rise and fall by itself, and has a simple structure. However, the contact between the wire rope and the excrement is easily corroded and broken. Steel wire coated with high-pressure polyethylene plastic can enhance corrosion resistance. However, the plastic outer skin is not wear-resistant, and is easily cut by a sharp object to lose the covering effect. Therefore, the surface of the transmission member that is required to be in contact with the steel wire rope must be smooth and free of burrs.
Scraper cleaning equipment, like general chicken equipment, also requires maintenance and maintenance to increase their service life.
(1) Always check that the fasteners and connectors are securely fastened to prevent damage to the machine due to looseness.
(2) If the machine has been working for 20 hours, the bearing grease should be filled once to the bearing; for a total of 300 hours, the bearing should be cleaned and inspected once. When the bearing working temperature exceeds 60 degrees, it should be removed and cleaned. If the bearing is worn out, it should be replaced and refilled with new grease.
(3) If the machine does not work for a long time, the power should be cut off and cleaned. Remove or loosen the V-belts away from corrosive liquids and gases.
